Visit EBTRON.com/SDPAppStore to access new application releases and device updates.
Applications and device updates can be installed on the SDX-1000 using the Applications Install Guide.
Note: Application graphics subject to change with application enhancements and updates.
The IAQ Enforcer® System is the complete solution for building airflow management, integrating EBTRON connected devices to view, configure, diagnose, and manage all airflow paths within the HVAC system, all from a single, centralized platform.
Taking advantage of advancements in network communications, microprocessor power, and display technology, the SDX-1000 Smart Display Panel serves as the centralized hardware interface of the system, offering an intuitive display panel that allows users to view and control the performance of all connected measurement devices across the building’s airflow systems.
The SDX-1000 Smart Display Panel is an application driven device enabling unmatched functionality and performance for any system. New and exciting applications and tools are continuously being developed to expand the functionality of the device. Applications, tools, and device updates are available free of charge for download.
The SDX-1000 Smart Display Panel is designed to operate on a stand-alone Ethernet network between the display and up to twenty compatible devices.1,2 Connected devices with a single Ethernet port require an Ethernet switch.
The stand-alone network design allows for auto discovery and setup of all approved connected devices at powerup and requires no networking experience by the installer or user. The device supports password protected administrative and user privileges for the SDX-1000 and individual applications for advanced security and peace-of-mind.
1. Devices with multiple sensor measurements are considered one “device”
2. Visit EBTRON.com/SDPDevices for an up-to-date list of compatible devices.
Display
7” diagonal, full color, capacitive touch screen display (800×480 resolution)
Operating System, Microcomputer, and Internal Memory
Linux-based 900MHz microcomputer with 512 MB of RAM and 8 GB of flash memory
External Memory (by others)
FAT32 formatted, USB Type A memory device (thumb drive) for upload operating system and installed application updates, new applications, or download of data from specific applications
Environmental Limits
Temperature: -4 to 120⁰F [-20 to 48.89⁰C]
Humidity: (non-condensing) 5 to 90%
Connections to Individual Measurement Devices
Protocol: EB-Bus Ethernet (dedicated network)
Wiring and Connections: CAT5e or higher cable with standard RJ-45 connectors using the T-568A or T-568B Ethernet wiring convention. Multiple measuring devices shall be connected through a standard Ethernet switch**
Max Distance between Devices and/or Switches: 328 ft. [100 m]
Maximum Devices Supported: 20
Communications to B.A.S.
None. Connections are made to separate analog or network outputs of each individual measuring device (refer to the individual measuring device data sheet for BAS connectivity options)
Power Requirement:
Barrel Jack, 12VDC (18W Max), 110 VAC adapter power supply provided
Enclosure:
Material: ABS, UL-94 HB
Dimensions: 6.4H x 10.5W x 1.6D in. [162.6H x 266.7W x 0.6D mm]
Listings & Compliance:
FCC: This device complies with Part 15 of the FCC rules
RoHS: This device is ROHS2 compliant
*Technical specifications subject to change based on component availability.
**Select an Ethernet switch designed for the temperature range it will be exposed to. Commercial and industrial temperature range Ethernet switches are available from EBTRON or your local EBTRON representative.
