Visit EBTRON.com/SDPAppStore to access updates and new application releases available for download to any USB Type A FAT32 formatted memory device.
Note: Application graphics subject to change with application enhancements and updates.
The Smart Display Panel Series takes advantage of advancements in network communications, microprocessor power, and display technology to create a state-of-the-art, single-point-of-access device to view, configure, and diagnose multiple measurement devices. In addition to the standard applications provided, new and exciting applications and tools are continuously being developed to expand the functionality of the device. Applications, tools, and updates are available free of charge for download.
The SDX-1000 is the Ethernet version of the IAQ Enforcer Smart Display Panel Series. The display is designed to operate on a stand-alone Ethernet network between the display and up to sixteen compatible devices1,2. Connected devices with a single Ethernet port require an Ethernet switch.
The stand-alone network design allows for auto discovery and setup of all approved connected devices at powerup and requires no networking experience by the installer or user. The device supports password protected administrative and user privileges for the SDX-1000 and individual applications for advanced security and peace-of-mind.
The SDX-1000 is provided with factory installed applications (partial list below). Updates and additional applications to increase functionality are continuously being developed and added to the device.3
Display
7” diagonal, full color, capacitive touch screen display (800×480 resolution)
Operating System, Microcomputer, and Internal Memory
Linux-based 900MHz microcomputer with 512 MB of RAM and 8 GB of flash memory
External Memory (by others)
FAT32 formatted, USB Type A memory device (thumb drive) for upload operating system and installed application updates, new applications, or download of data from specific applications
Environmental Limits
Temperature: -4 to 120⁰F [-20 to 48.89⁰C]Humidity: (non-condensing) 5 to 90%
Connections to Individual Measurement Devices
Protocol: EB-Bus Ethernet (dedicated network)
Wiring and Connections: CAT5e or higher cable with standard RJ-45 connectors using theT-568A or T-568B Ethernet wiring convention. Multiple measuring devices shall be connected through a standard Ethernet switch**
Max Distance between Devices and/or Switches: 328 ft. [100 m]Maximum Devices Supported: 16
Communications to B.A.S.
None. Connections are made to separate analog or network outputs of each individual measuring device (refer to the individual measuring device data sheet for BAS connectivity options)
Power Requirement:
Barrel Jack, 12VDC (18W Max), 110 VAC adapter power supply provided
Enclosure:
Material: ABS, UL-94 HB
Dimensions: 6.4H x 10.5W x 1.6D in. [162.6H x 266.7W x 0.6D mm]
Listings & Compliance:
FCC: This device complies with Part 15 of the FCC rules
RoHS: This device is ROHS2 compliant
*Technical specifications subject to change based on component availability.
**Select an Ethernet switch designed for the temperature range it will be exposed to. Commercial and industrial temperature range Ethernet switches are available from EBTRON or your local EBTRON representative.
