EB-Link App

Commissioning Data at the Touch of Your Fingers

Free EB-Link App! The EB-Link App allows you to view airflow measurement data – temperature, humidity, enthalpy, dewpoint (humidity values available on select models), and other parameters with all EBTRON Gold Series products. Real-time traverse data can be stored on the phone and emailed as a text file. It’s a tool that can enhance TABB and commissioning agents to provide a quick validation anytime without going through the BAS.
Data at the Touch of Your Finger.

>Download Brochure

EB-Link end user agreement.

Data at the Touch of Your Finger!

Download the App

When EBTRON is installed, Everyone Benefits.

Engineers/Commissioning Agents

Verifies the airflow measurement station (AFMS) is configured correctly by recording all settings.
The diagnostic output provides a complete record of the AFMS setup, flow rate, etc., to validate that the area matches the design duct area – the altitude of the job site is correct (since elevation impacts density and actual flow rate).
Records any adjustments (Gain/Offset, etc.) to AFMS for future reference.
Independently validate flow rates, temperature, humidity, enthalpy, and dewpoint settings on a job site.
A “punch list” tool allowing functional performance testing before the entire BAS system is operational. The EB-Link can give insight into the system’s operation without needing a fully functioning BAS.

Testing, Adjusting & Balancing Professionals

Traverse reports use data from the AFMS.
Live measurements as a performance baseline before using any instruments.
Verify that products are appropriately set up and that no trouble codes exist before operation (if incorrectly set up, the flow rate will be wrong).
Modify default integration on the EB-link of 100 (30 sec) [transmitter default is 0.3 sec] to a longer averaging period. For example, 400 is 2 min allowing a longer running average in areas where the air changes quickly, such as outdoor air intakes.
Use temperature traverse to validate air temperature at multiple locations, ensuring no temperature stratification or variance.

Facility Managers

Monitor HVAC system performance (i.e., delivery of the right amount of air).
Validate flow and temperature with traverse data.
Traverse data lets you manually record overtime to determine system degradation and/or maintenance.
Node measurements and comparisons help illustrate system performance.
For example, viewing only the average would not allow you to know there is a problem. As a result of the reduced measured average, a fan might speed up, or dampers may open when they shouldn’t.
Easily walk through a building and verify AFMS performance using the analog output 2 for flow alarm or trouble indication (transmitter will detect a problem).
Record the settings of the AFMS and determine if anything changed after commissioning.
AFMS data access if the duct is inaccessible or out of reach.
Record all equipment serial numbers.
View factory-calibrated flow measurements by changing the values on the live screen to the factory measurements without disrupting the system (view-only, no written access).

EB-Link App

Commissioning Data at the Touch of Your Fingers

Data at the Touch of Your Finger!

When EBTRON is installed, Everyone Benefits.

Engineers/Commissioning Agents

Testing, Adjusting & Balancing Professionals

Facility Managers

EB-Link Data Access on EBTRON Gold Series

Quick Links

About Us

Support

Contact Us | Products | Rep Finder | Privacy Policy

Select Your Country/Region

Enter your Zip Code

FIND A REP NEAR YOU